Skip to main content
Product Guide
 Back to list

NETX 50 - Network controller for fieldbus and Real-Time Ethernet slaves with memory controller

Classification:
Product name:
NETX 50 - Network controller for fieldbus and Real-Time Ethernet slaves with memory controller

Shortdescription:
Network controller for fieldbus and Real-Time Ethernet slaves with memory controller

Product types:
Enabling Technology

Technology & Profiles:
PROFIBUS, PROFINET, IO-Link

Certification number:

Company:
Hilscher Gesellschaft für Systemautomation mbH

Rheinstr. 15
65795 Hattersheim
Germany

Nico M�ding
Tel +49 6190 9907 0
www.hilscher.com
info(at)hilscher(dot)com

Illustration:
Product description:

NETX 50

  • Flexible „high end“ network controller equipped with a host interface or stand-alone solution for digital I/Os
  • Two communication channels as Real-Time Ethernet with PHY or fieldbus
  • Dual-port memory, extension bus or digital I/Os

The netX is a highly integrated network controller with a new system architecture optimized for communication and maximum data throughput.

Via an integrated dual-port memory it works as a companion chip to a host CPU. From fieldbus systems to Real-Time Ethernet systems it covers the whole spectrum of industrial communication. If the application does not justify an additional CPU, the host interface can be configured as an extension bus or directly as a digital input and output.

The 32-bit CPU ARM 966E-S is clocked with 200 MHz. It has a 112 KB internal RAM and a 64 KByte ROM memory. Via the 32-bit memory controller the memory can be extended externally and flexibly with SDRAM, SRAM or FLASH.

Extensive periphery functions, serial interfaces such as UART, USB, SPI, I2C, as well as the integrated IO-Link and CCD-controller enable a large variety of applications.

The central data switch and the freely configurable communication channels with their own intelligence represent the unique feature and distinguishing characteristic of the netX as a “high end” network controller. The data switch connects the ARM CPU as well as the communication, host, and DMA controllers with the memory or the peripheral units via five data paths. The controllers thus transmit the data in parallel, contrary to the traditional sequential architecture with merely one common data bus and additional bus allocation cycles.

The controllers of the two communication channels are identical and have a two-level structure. They consist of dedicated ALUs and special logic units that receive their protocol function via microcode. The PHYs are integrated for Ethernet, i.e. the external circuit for Ethernet is reduced to passive omponents such as transformers and RC components. The Medium-Access-Controller xMAC sends or receives the data according to the respective bus access process and encodes or converts the data into a byte representation.

The Medium-Access-Controller xMAC sends or receives the data according to the respective bus access process and encodes or converts the data into a byte representation.

The Protocol Execution Controller xPEC compiles the data into packets and controls the telegram traffic. Large data amounts are exchanged block-by-block via DMA with the ARM memory while each channel has a Dual-Port-Memory for status information. As an alternative, a triple buffer logic is implemented which always provides the address of the next free buffer to enable a conflict-free data exchange.

With the intelligent communication ALUs, the netX realizes the most diverse protocols and protocol combinations in one chip – an absolutely new feature in the industrial communication technology.

 Back to list

Le nostre tecnologie

PROFIBUS è un sistema di comunicazione digitale standardizzato ed aperto, utilizzabile in tutte le aree di applicazione, dal manifatturiero al processo.

PROFINET è l'innovativo standard aperto per l'Industrial Ethernet. E' in grado di soddisfare tutti i requisiti necessari per le applicazioni di automazione industriale.

IO-LINK è la prima tecnologia IO standardizzata a livello mondiale (IEC 61131-9) per comunicare con sensori ed attuatori sotto il livello di comunicazione del bus di campo. Può essere integrata con PROFIBUS e PROFINET.