Product Guide
Terminator T1 Pepper
Classification:
Company:
Klopperman 16
2292 JD WATERINGEN
Netherlands
Fedor Meyer
Tel +31-(0)174-671800
https://www.hms-networks.com/
feme(at)hms-networks(dot)com
Illustration:
Product description:
The T1-Pepper provides customizable (active) termination for PROFIBUS segments that do not comply with the standard RS 485 impedance. With rotary switches the impedance of the termination can be set.
Applications
- PROFIBUS communication over non-standard cable.
- Idle voltage increaser for EMC sensitive applications.
- Impedance tuner for poor segments.
2 Rotary switches manipulate the values of the termination network. One for the middle resistor and one for the 2 pull-up resistors. The combination of both set the impedance and the level of the idle voltage. The T1-Pepper is a partner product for the COMbricks SALT repeater that requires termination at the other side of the cable. The rotary switches have to be set identical at both sides.
The T1-Pepper can be used by all fieldbuses that require active termination. It has a redundant power supply and diagnostic LEDs to indicate the status of each power source. It can be installed on a standard DIN-rail.
Technical specifications
Termination specifications
- 94 .. 940 Ohm (DC) - 57 .. 1500 Ohm (AC)
- Connection speed: 9.6 kbps..12 Mbps (automatic detection)
- Removable screw terminals
Power supply specifications
- Operating Voltage: 19..28 VDC
- Current consumption: < 60 mA
- Redundancy: Power 1 OR 2
- Diagnostic LEDs to indicate the status of the power supply
Ambient conditions
- Operating temperature: -20..+60 °C
Dimensions and weight
- Dimensions (LxWxH): 106 x 55 x 33 mm (without plugs)
- 125 g
Others
- DIN-rail mounting
- IP 20
- 1 galvanicly isolated channel
- Non DP cable
procentec.com/products/profihub/units/t1-pepper/