;-------------------------------------------------------------------------------------------- ; GSD Detail For ChongQing WECAN SST PA Pressure Transmitter " ; Date: 2023-7-6 ; File: WAI11C4.gsd ; CHONGQING WECAN PRECISION INSTRUMENTS ;-------------------------------------------------------------------------------------------- ;-------------------------------------------------------------------------------------------- ; General DP keywords ;-------------------------------------------------------------------------------------------- #Profibus_DP GSD_Revision = 5 ; for supporting IM_FUNC Vendor_Name = "CHONGQING WECAN PRECISION INSTRUMENTS" Model_Name = "SST Pressure Transmitter" Revision = "1.0" Ident_Number = 0x11C4 Protocol_Ident = 0 ; 0 = PROFIBUS-DP Station_Type = 0 ; 0 = DP-Slave FMS_supp = 0 Hardware_Release = "1.0" Software_Release = "01.00" 31.25_supp = 1 45.45_supp = 1 93.75_supp = 1 MaxTsdr_31.25 = 100 MaxTsdr_45.45 = 250 MaxTsdr_93.75 = 1000 Redundancy = 0 ; 0 = no Repeater_Ctrl_Sig = 0 ; 0 = Not connected 24V_Pins = 0 ; 0 = Not connected Implementation_Type = "FBC0409/SIA Tech" Bitmap_Device = "WAI11C4" Info_Text = "Pressure transmitter for pressure, \ PROFIBUS PA Profile 3.02 with 1 function block: Analog input" ;-------------------------------------------------------------------------------------------- ; Additional keywords for different physical interfaces ;-------------------------------------------------------------------------------------------- Physical_Interface = 1 ; 1 = Manchester coded and bus powered (MBP) Transmission_Delay_31.25 = 0 Reaction_Delay_31.25 = 0 End_Physical_Interface ;-------------------------------------------------------------------------------------------- ; Basic DP-Slave related keywords ;-------------------------------------------------------------------------------------------- Freeze_Mode_supp = 1 ; 1 = Freeze Mode supported Sync_Mode_supp = 0 ; 0 = no Sync Mode supported Auto_Baud_supp = 0 ; 0 = no automatic baudrate recognition Set_Slave_Add_supp = 1 ; 1 = Set Slave AddrFunction supported Min_Slave_Intervall = 250 ; 25ms min. betw. 2 slave list cycles Modular_Station = 1 ; 1 = Modular Station Max_Module = 1 ; 1: PA_AI Max_Input_Len = 5 ; maximum Input Length 5 Max_Output_Len = 0 ; maximum Output Length 0+2 Max_Data_Len = 5 ; higher sum of max. In or Output Length Max_Diag_Data_Len = 14 Slave_Family = 12@ChongQing WECAN@Pressure ; 12 = PA Process Control Device Ident_Maintenance_supp = 1 ; I&M Function is supported Fail_Safe = 0 Prm_Block_Structure_supp = 1 Prm_Block_Structure_req = 0 Isochron_Mode_supp = 0 Isochron_Mode_required = 0 PrmCmd_supp = 0 PrmCmd_req = 0 ;-------------------------------------------------------------------------------------------- ; set user prm const data ;-------------------------------------------------------------------------------------------- Max_User_Prm_Data_Len = 8 Ext_User_Prm_Data_Const(0) = 0x00,0x00,0x08,0x05,0x41,0x00,0x00,0x01 ;-------------------------------------------------------------------------------------------- ; Slave related keywords for DP extensions ;-------------------------------------------------------------------------------------------- DPV1_Slave = 1 C1_Read_Write_supp = 1 C1_Max_Data_Len = 128 C1_Read_Write_required = 0 C1_Response_Timeout = 400 C2_Read_Write_supp = 1 C2_Max_Data_Len = 128 C2_Read_Write_required = 1 C2_Max_Count_Channels = 4 Max_Initiate_PDU_Length = 52 C2_Response_Timeout = 4000 DPV1_Data_Types = 1 ;-------------------------------------------------------------------------------------------- ; Description of device related diagnosis ;-------------------------------------------------------------------------------------------- Unit_Diag_Bit(16) = "Error appears" Unit_Diag_Bit(17) = "Error disappears" Unit_Diag_Bit(24) = "Reserved by PI, fixed to 0" ;"Hardware failure electronics" Unit_Diag_Bit(25) = "Reserved by PI, fixed to 0" ;"Hardware failure mechanics" Unit_Diag_Bit(26) = "Reserved by PI, fixed to 0" ;"Motor temperature too high" Unit_Diag_Bit(27) = "Reserved by PI, fixed to 0" ;"Electronic temperature too high" Unit_Diag_Bit(28) = "Reserved by PI, fixed to 0" ;"Memory error" Unit_Diag_Bit(29) = "Reserved by PI, fixed to 0" ;"Measurement failure" Unit_Diag_Bit(30) = "Reserved by PI, fixed to 0" ;"Device not initialized" Unit_Diag_Bit(31) = "Reserved by PI, fixed to 0" ;"Device initialization failed" Unit_Diag_Bit(32) = "Reserved by PI, fixed to 0" ;"Zero point error" Unit_Diag_Bit(33) = "Reserved by PI, fixed to 0" ;"Power supply failed" Unit_Diag_Bit(34) = "Reserved by PI, fixed to 0" ;"Configuration invalid" Unit_Diag_Bit(35) = "Restart" Unit_Diag_Bit(36) = "Coldstart" Unit_Diag_Bit(37) = "Maintenance required" Unit_Diag_Bit(38) = "Reserved by PI, fixed to 0" ;"Characteristics invalid" Unit_Diag_Bit(39) = "Ident_Number violation" Unit_Diag_Bit(40) = "Maintenance Alarm" Unit_Diag_Bit(41) = "Maintenance Demanded" Unit_Diag_Bit(42) = "Function Check" Unit_Diag_Bit(43) = "Invalid process conditions" Unit_Diag_Bit(55) = "Extension Available" ;Empty module Module = "Not in cyclic data transfer " 0x00 0 ; Module-Reference Info_Text = "No function block selected. Function disabled" EndModule ;"AI.OUT" ;"Pressure or Temperature" ;Modules for Analog Input Module = "Analog Input (AI)short" 0x94 1 EndModule ;Modules for Analog Input Module = "Analog Input (AI)long" 0x42,0x84,0x08,0x05 2 EndModule ;----------- Description of the module assignment: --------------------- ; SlotDefinition Slot(1) = "Analog Input" 1 0,1,2 EndSlotDefinition ;-------------------------------------------------------------------------------------------- ; Slave related keywords for Data Exchange with Broadcast ;-------------------------------------------------------------------------------------------- ;-------------------------------------------------------------------------------------------- ; Slave related keywords for Isochronous Mode ;-------------------------------------------------------------------------------------------- ;-------------------------------------------------------------------------------------------- ; Slave related keywords for PROFIsafe Profile ;-------------------------------------------------------------------------------------------- ;-------------------------------------------------------------------------------------------- ; Slave related keywords for extended parameterization ;--------------------------------------------------------------------------------------------