#Profibus_DP
GSD_Revision        = 5
Vendor_Name         = "SIC"
Model_Name          = "M8000"    
Revision            = "1.1"
Ident_Number        = 0x0C46 
Protocol_Ident      = 0
Station_Type        = 0
FMS_supp            = 0
Hardware_Release    = "2.70"
Software_Release    = "2.32"
9.6_supp=1
19.2_supp=1
45.45_supp=1
93.75_supp=1
187.5_supp=1
500_supp=1
1.5M_supp=1

MaxTsdr_9.6=60
MaxTsdr_19.2=60
MaxTsdr_45.45=250
MaxTsdr_93.75=60
MaxTsdr_187.5=60
MaxTsdr_500=100
MaxTsdr_1.5M=150
Redundancy          = 0

Bitmap_Device="SIC0C46"

Repeater_Ctrl_Sig   = 0
24V_Pins            = 0
Implementation_Type     = "SPC4"
Freeze_Mode_supp    = 0
Sync_Mode_supp      = 0
Fail_Safe           = 0		

Auto_Baud_supp	    = 1	
Min_Slave_Intervall = 20
Modular_Station     = 0
Max_Module          = 1
Max_Input_Len       = 7                    ; maximum Input Length
Max_Output_Len      = 4                    ; maximum Output Length
Max_Data_Len        = 11                   ; maximum In-Output Length
Slave_Family        = 1@TdF@SIC

Max_Diag_Data_Len   = 6
Set_Slave_Add_supp  = 1

Max_User_Prm_Data_Len = 3

User_Prm_Data_Len = 3
Ext_User_Prm_Data_Const(0)=0x80,0x00,0x00


PrmText=1
Text(0)="Disabled"
Text(1)="Enabled"
EndPrmText

;----------- Description of extended DP features: ---------------------
;
;DPV1 CAPABILITY
DPV1_Slave       = 1
DPV1_Data_Types  = 0
;
; C1_Read_Write
C1_Read_Write_supp     = 1
C1_Max_Data_Len        = 48
C1_Response_Timeout    = 4000
;C1_Max_Count_Channels  = 2
;C1_Read_Write_required = 0
;
; C2_Read_Write
;
Max_Iniitiate_PDU_Length   =52
C2_Read_Write_supp     = 1
C2_Max_Data_Len        = 48
C2_Response_Timeout    = 4000
C2_Max_Count_Channels  = 1
;C2_Read_Write_required = 1
;
;
; I&M function supported
Ident_Maintenance_supp = 1
;

;--- Description of physical interface for async. and sync. transmission: ---
;Physical_Interface = 1                     ; RS-485 Standard Copper
;Transmission_Delay_45.45 = 0
;Reaction_Delay_45.45     = 0
;Transmission_Delay_93.75 = 0
;Reaction_Delay_93.75     = 0
;End_Physical_Interface
;
;Physical_Interface = 0                     ; 0: RS 485 Standard Copper	1: IEC61158-2
;Transmission_Delay_31.25 = 0
;Reaction_Delay_31.25     = 0
;End_Physical_Interface

;----------- Description of device related diagnosis: ---------------------
;
;Unit_Diag_Bit(16)   = "Error appears"
;Unit_Diag_Bit(17)   = "Error disappears"
;Unit_Diag_Bit(24)   = "Hardware failure electronics"
;Unit_Diag_Bit(25)   = "Hardware failure mechanics"
;Unit_Diag_Bit(26)   = "Motor temperature too high"
;Unit_Diag_Bit(27)   = "Electronic temperature too high"    
;Unit_Diag_Bit(28)   = "Memory error"
;Unit_Diag_Bit(29)   = "Measurement failure"
;Unit_Diag_Bit(30)   = "Device not initialized"
;Unit_Diag_Bit(31)   = "Device initialization failed"
;Unit_Diag_Bit(32)   = "Zero point error"
;Unit_Diag_Bit(33)   = "Power supply failed"
;Unit_Diag_Bit(34)   = "Configuration invalid"
;Unit_Diag_Bit(35)   = "Restart"
;Unit_Diag_Bit(36)   = "Coldstart"
;Unit_Diag_Bit(37)   = "Maintenance required"
;Unit_Diag_Bit(38)   = "Characteristics invalid"
;Unit_Diag_Bit(39)   = "Ident_Number violation"
;Unit_Diag_Bit(40)   = "Maintenance Alarm"
;Unit_Diag_Bit(41)   = "Maintenance Demanded"
;Unit_Diag_Bit(42)   = "Function Check"
;Unit_Diag_Bit(55)   = "Extension Available"
;------------------------------------------------------------------------------
Module   ="RunStatus+ReadBack+SetPD+SetP" 0x16,0x23
1
EndModule